Three One Air Vent
(Strainer embedded type)
As Strainer, ball valve and manual drain are unified, it is easy to construct and is economical with reduce labor cost.
Fault factors caused by several connection parts were eliminated,
and with attaching manual drain, it is easy to remove foreign object in screen and it reduces discomfort of constructing separate drain.
Frequent defect factors cab be eliminated perfectly by utility model registration and registration of design.
To make attach and remove of air vent system in pipping easy, it was treated as connection union and it makes easy construction and easy to replace in case of fault occurrences.

  • TAV-101

    -

  • TAV-301

    -

  • TAV-401

    -

  • TAV-301(20K)

    (20K applied model)
Dimension
Model SIZE H W
TAV-101 15A 125 54
20A 125 54
TAV-301 15A 190 54
20A 195 54
TAV-401 15A Possible to length
control		 54
20A 54
TAV-301(20K) 15A 245 80
20A 255 80
25A 240 80
Specification
Model TAV-101 TAV-301 TAV-401 TAV-301(20k)
Applied Fluid Cold and hot water Cold and hot water
Applied Pressure MAX 1MPa MAX 1.96MPa
Applied Temperature 100℃ 100℃
Water Pressure Test 1.75MPa 3MPa
Main
Material		 BODY CAC203 CAC203
SCREEN STS 304 STS 304
COVER C3771 C3771
FLOAT P.P P.P
Installation Method
It should be installed vertically for plumbing. (Within ±5°)
air vent system in pipping properties, little of water can be fallen in a moment at the time of air emitting, so safe pipe inducement with hose is needed.
As entering between the air vent system and ball valve is easy, so please do not damage the packing with using excessive force
Do not reassemble after disassembling.
Remove air by draining manually when resuming the system (in the event of water inflow) after initial operation and draining.